A chainsaw winch is a great way to move large wood pieces or logs.
This simple tool can be used to safely and easily lift heavy objects using your chainsaw.
This article will show you how to make a chainsaw-winch.
How To Make Your Chainsaw Winch Lasts Longer
Gather all the materials. You will need a chainsaw and carabiners as well as rope, saw horses safety goggles, eye protection, chain oil, pipe clamps, and chain oil. You will need building plans to help you build your winch following our instructions.
Step 1 Using carabiners and saw horses, attach the rope to the stand to support the chainsaw. Make sure it is secured so your chainsaw doesn’t fall when you pull it out of deep mud or ditches.
Step 2 Using a pencil, draw two circles on each clamp pipe using . Make sure they are equal in circumference and diameter. Use an electric drill to drill holes on both sides of the circles.
Use a drill bit slightly smaller than the screws that you are using. This will prevent wood from splitting during screwing.
Step 3 – Place the pipe clamps on the marks made by the sawhorses and align them evenly. Finally, secure them with screws.
Step 4 – Take the vice clamps, and place them around the Rope. Make sure there is equal rope on each side of the clamp. Before you clamp the rope in place, make sure it isn’t twisted.
Step 5 Using an electric drill, make a hole in each end of the rope clamp. Make sure the hole is large enough for the sawhorses so they can pass through it.
Step 6 – Place one end of the rope through the holes in the vice clamps and then push the rope down between the sawhorses. When pushing the sawhorse through, it should face downwards.
Step 7 – Place your chainsaw in the vice clamp that is on top of the rope, with the oil reservoir facing up just below it.
You will need to leave enough rope at both ends for you to attach them onto the carabiner hooks in step 9.
Attach one end to a carabiner loop attached to a chainsaw handle. Then attach the other carabiner loop an empty portion on the chainsaw handle.
Step8: Attach a carabiner to one end of your chainsaw handle. Then, attach the other end to the carabiner hook.
When connecting the ends, make sure you don’t twist the rope. It could cause the rope to break or fray. The exact location of your second carabiner is determined by how much slack you have left after trimming excess in step 12.
Step 9 Using a piece or any other sturdy material, create a circle shape by making two loops at each end. This will allow for an opening that you can attach a carabinerhook.
Step 10: Pass the wire through the clamp. You will need to attach your carabiner later.
Two loops should be made on each end of the wire. One end will go through the opening in the vice clamp. The other end will go through the opening from the opposite side.
Step 11 Ensure that your chainsaw’s bar and chain are oil-lubricated so they move freely when turning. You may find that your rope is snagged on your saw’s body and breaks or frays if you don’t do this.
Step 12 – Unscrew the screw holding your vice clamp to loosen it. This will allow you some leeway. Your chainsaw will allow you to cut into the log or other object you want to remove from the ditch or mudhole.
Keep cutting until you are about three quarters through. Don’t slip with the chainsaw as this can cause injury. A large stick, or something similar, can be used as leverage to cut deeper into the material that is trapping your saws beneath it.
Next, tighten your vice clamp so that there is enough slack in the rope ends to allow them to be attached at their carabiner hooks.
Step 13 – Place the chainsaw winch onto a stable surface, before attaching the carabiner rings to the ends of your rope.
Step 14 – Push down on the handle of the chainsaw so that the bar and chain press down into the object or log you want to lift. The sawhorses will then begin lifting the object upwards.
Step 15 – Hold your hands tightly on the handles of the chainsaw until you can see that it is not cutting through the object or log. It is now freed from its place of attachment. The rope should be tightened tightly if it is done correctly.
Maintain Your Chainsaw Winch
Chainsaw winches are an essential part of any chainsaw owner’s equipment. They should be maintained properly to ensure their long-term reliability. These are six tips to maintain a chainsaw winch properly:
- Use a brush and degreaser to clean the chain and sprocket regularly.
- Use a light oil to lubricate the gears every few months, or whenever they sound noisy.
- Every time you use the chainsaw winch to cut the cord, check the tension and adjust as needed.
- As needed, replace worn parts such as cables and pulleys as well as bearings and bearings.
- Make sure your chainsaw winch is in top working order by cleaning it and keeping it lubricated.
- Keep your chainsaw winch dry and away from water to prevent corrosion.
Tips To Use Your Chainsaw Winch
Be prepared to strain your chainsaw winch when you are trying to lift heavy objects. These are some tips to help you use your chainsaw winch safely.
1. Check that the chain is tight. You can loosen it a little before you begin hauling to ensure it doesn’t slip or cause damage.
2. Make sure you choose the right type of cable. A durable, thicker cable will last for longer than one that is thin.
3. Pay attention to the tensioner arm. When you pull on the cable, it should move steadily and smoothly. It should not wobble or make loud noises when pulled on the cable. Your cable may be too tight and should be loosened up.
4. If you need help, get it. Chainsaw winch safety first!
How Can You Attach A Winch To A Chainsaw?
A chainsaw is a great tool for homeowners and professionals, but you will need a winch to make them work the way they were intended. A winch is able to pull large objects, such as logs, down from high places. How to use a winch with a chainsaw.
- Attach the winch to your chainsaw chain.
- Place the other end the chainsaw chain around the object you are trying to pull down.
- Turn on your chainsaw, and then let it run until it is in gear. Then start your engine and give it some juice.
- You can hold the chain in one hand, while the other holds the handle of your chainsaw. The object will fall as you watch!
What Is The Maximum Weight A Chainsaw Winch Can Pull?
Chainsaw winches can be used to lift heavy objects. They can pull up to 2,722kg. They can pull objects up to 2,722 kg.
What Is The Maximum Weight A Lewis Winch Can Pull?
The Lewis Winch is reliable and powerful, and can pull a lot of weight. The Lewis Winch can pull 1,814kg!
It is ideal for use on ATVs and trucks as well as trailers. The Lewis Winch is a popular choice among outdoor enthusiasts due to its versatility and power.
Final Thought
If the rope is still too loose after you have completed all the steps, go back to step 12 to cut the log or object deeper.
This will ensure that the rope is completely cut. If the ropes have very little slack, it’s best to stop cutting them further. This could cause damage to your chainsaw and even injures someone.
